Advertisement
Operation
Logging Status Edit
Logging Period Edit
Logging Site Edit
3-16
MIE ADR-1500 Instruction Manual
LOGGING ENABLED
01
The Logging Status Edit screen allows the user to enable or disable data
logging. The asterisk (*) appears to the left of the field being edited.
From the Logging Parameters screen, press the
●
logging status.
Press the
key to save the logging status and forward to the
ENTER
●
Logging Period edit.
LOGGING STATUS
*
ENABLED
The Logging Period Edit screen allows the user to edit the logging period.
The asterisk (*) appears to the left of the field being edited. Use the ▲ and
▼ keys to increment or decrement the time. If either button is held, then
the logging period will change twice per second but the editing focus will
switch to the digit on the left after the button is held for five seconds.
From the Logging status screen, press the
●
logging period.
Press the
key to save the logging period and forward to the
ENTER
●
Logging Site edit.
LOGGING PERIOD
*
1:00:00 h:m:s
The Logging Site Edit screen allows the user to select from the list of 50
logging sites. Each site has three associated values: Site Number, a Site
Name, and a Calibration Factor. The site name is the only value displayed
on the second line. Use the ▲ and ▼ keys to change the site number and
the corresponding site name appears on the second line. Also, the
corresponding calibration factor is chosen. The site numbers are in range
(1, 2, 3..., 50), the site names and calibration factors are editable only by
external serial command. The asterisk (*) appears to the left of the field
being edited.
key and edit the
ENTER
key to edit the
ENTER
Thermo Fisher Scientific
Advertisement
Troubleshooting
