Download Print this page

Thermo Scientific MIE ADR-1500 Instruction Manual page 8

Particulate monitor

Advertisement

About This Manual
WEEE Symbol
Where to Get Help
iv
MIE ADR-1500 Instruction Manual
Alert
The following symbol and description identify the WEEE marking used on
the instrument and in the associated documentation.
Symbol
Description
Marking of electrical and electronic equipment which applies to electrical and
electronic equipment falling under the Directive 2002/96/EC (WEEE) and the
equipment that has been put on the market after 13 August 2005.
Service is available from exclusive distributors worldwide. Contact one of
the phone numbers below for product support and technical information
or visit us on the web at www.thermo.com/aqi.
1-866-282-0430 Toll Free
1-508-520-0430 International
Description
The instrument should be charged in the upright position.
Replace with specified battery only.
Disconnect the battery cable from the power
communication board.
If unsuccessful, the instrument must be sent back to the
factory for service.
For the 0 to 2 V output signal, the externally connected
load must have an impedance of more than 200 kilo-
ohms; For the 4 to 20 mA output signal, the externally
connected load must have an impedance of less than 300
ohms.
Thermo Fisher Scientific

Advertisement

loading