90
Commissioning
Table 51: Object groups and possible status messages
Object Group
System
Remote connections
Timing
Process Image
Inter System
Communication
Configuration
Click the [Execute] button to query the status of the selected object group.
3.
8.1.6
Status Display
The status messages are output in the Status display area. The display varies
depending on which page is called up, e.g. Settings, Net Forming, PI Mapping,
Block Transfer and Diagnostics.
Figure 39: Status Display area
Pos : 78.4 /Serie 750 (WAGO-I/O-SYST EM)/In Betrieb nehmen/Parametrier en mit WAGO-I/O-CH ECK/Konfigurieren und Parametrier en - Register kommuni kation, Parameter kanal - 750-0644 @ 16\mod_1376562278737_21.doc x @ 129012 @ 2 @ 1
8.2
Configuration and Parameterization via Process
Image
As an alternative to using WAGO I/O-CHECK, you can also use register
communication, parameter channel and Mailbox to configure and parameterize
the 750-644 I/O module. A more detailed description is available in section
"Process Image".
Pos : 79 /D okumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
*
Status
Ok
Ok
Not specified
BER is moderate
BER is high
Less than 39 channels are available
Less than 54 channels are available
Connection errors
Radio connections
Connection interrupted
Ok
Watchdog
Ok
PI is faulty
A remote mailbox is enabled
Ok
Error in Mailbox communication
Ok
Configuration changed
Error in the network configuration
*
The meanings of the individual status messages are available in the appendix.
WAGO-I/O-SYSTEM 750
750-644 Bluetooth
Version 2.0.0, valid from FW/HW Version 03/03
®
RF-Transceiver
Manual