Connecting To Windows 7 Pc; Preparing A Pc; Preparing A 750-644 I/O Module; Table 69: Configuring The 750-644 I/O Module To Connect To A Pc - WAGO I/O-SYSTEM 750 Manual

110 Example Configuration
Pos : 81.7 /Serie 750 (WAGO-I/O-SYST EM)/In Betrieb nehmen/Anwendungsbeis piel e 750-644: Ver bindung Windows7- PC @ 17\mod_1383643786863_21.doc x @ 136668 @ 23333 @ 1
9.4

Connecting to Windows 7 PC

Proceed as follows to establish a connection between a 750-644 I/O module and
your PC:
9.4.1

Preparing a PC

To link a 750-644 I/O module and PC, you have to know the device name or
MAC ID of your PC. The MAC ID is available in the settings of your Bluetooth
adapter:
1. Right-click on the Bluetooth
2. Select Open Settings in the context menu.
3. Go to the Hardware tab.
Press the [Properties] button.
4.
Go to the Advanced tab. The radio information is displayed. The requested
5.
MAC ID is the address.
9.4.2

Preparing a 750-644 I/O Module

1. Configure the 750-644 I/O module in WAGO-I/O-CHECK 3 (see also
section "Commissioning" > ... > "Configuration and Parameterization with
WAGO-I/O-CHECK"). Make sure that the [Configuration] button is
selected in the Operation Mode area.
2. Enter the following parameters on the Settings page:

Table 69: Configuring the 750-644 I/O module to connect to a PC

Description
Device role
Encryption
Authorization
Name
Password
3. Go to the Net Forming page.
4. Scan for available devices: Choose the All radio button and press the
[Search] button.
In the list of Accessible Devices, select the MAC ID of your PC and add it
5.
to the list of Ad hoc Devices (slot 08).
Bind your PC by clicking the entry in the Bind column and selecting "Yes"
6.
in the respective selection list.
7. Go to the PI Mapping page.
750-644 Bluetooth
®
icon in the system tray.
Input
Slave
On
Password
My644
0000
Version 2.0.0, valid from FW/HW Version 03/03
WAGO-I/O-SYSTEM 750
®
RF-Transceiver
Manual
®