Starting Data Exchange Via Terminal Program; Figure 50: Enter The Pairing Code; Figure 51: Get Com Port - WAGO I/O-SYSTEM 750 Manual

112 Example Configuration

Figure 50: Enter the pairing code

Click the [Next] button. The I/O module is added to the computer.
3.
9.4.4

Starting Data Exchange via Terminal Program

Right-click on the 750-644 I/O module ("My644") and select Properties in
1.
the context menu.
2. Go to the Hardware tab.

Figure 51: Get COM port

In Device Functions, the assigned COM port of the 750-644 I/O module is
displayed. Note the specified COM port.
3. Click the [Properties] button.
4. Go to the Port Settings tab and enter the following values:
WAGO-I/O-SYSTEM 750
750-644 Bluetooth
Version 2.0.0, valid from FW/HW Version 03/03
®
RF-Transceiver
Manual