Navigation; Table 41: Buttons In The Bluetooth ® Parameterization Dialog - WAGO I/O-SYSTEM 750 Manual

76 Commissioning
Table 41: Buttons in the Bluetooth
Button
8.1.3

Navigation

You can toggle between the different configuration areas of the 750-644 I/O
module by using the navigation on the left side of the screen:
®
parameterization dialog
Description
[Exit] closes the active window. If you have changed settings, you
are asked to save these values in the 750-644 I/O module.
[Open] opens a window to select a parameter file. Device settings
are read from the parameter file and transferred to the connected
750-644 I/O module.
[Save] opens a window to select a parameter file. The device
settings are saved to the parameter file.
[Read] Reads the current settings from the 750-644 I/O module and
displays them in this window.
[Write] transfers the settings displayed in this window to the
connected 750-644 I/O module.
[Factory Settings] overwrites the locally-saved configuration with
factory settings.
[Configuration] opens the data frame dialog. There you can set the
process image size and Mailbox size.
[Restart] starts the host controller again.
NOTICE: All radio connections are broken off.
[Flash] writes the current configuration of the host controller to the
flash memory and restarts it.
NOTICE: All radio connections are broken off.
[Help] displays help for this window.
WAGO-I/O-SYSTEM 750
750-644 Bluetooth
Version 2.0.0, valid from FW/HW Version 03/03
®
RF-Transceiver
Manual