Operating Mode And Role Assignment; Figure 26: Navigation Between Configuration Areas; Table 42: Navigation Between Configuration Areas - WAGO I/O-SYSTEM 750 Manual

WAGO-I/O-SYSTEM 750
®
750-644 Bluetooth RF-Transceiver

Figure 26: Navigation between configuration areas

You can choose from the following menu items that display their own pages in the
parameterization area:

Table 42: Navigation between configuration areas

Menu item
Settings
Net Forming
PI Mapping
Block Transfer
Diagnostics
8.1.4

Operating Mode and Role Assignment

The Device Role area at the top displays of the configured 750-644 I/O module
takes the role of the master or the role of a slave.
The Operating Mode area at the bottom is used to assign an operating mode to the
local 750-644 I/O module. Use the buttons to choose whether the 750-644 I/O
module should be operated in "Configuration" mode or in one of the two
"Communication" modes ("Real-Time" or "Ad-hoc"):
Manual
Version 2.0.0, valid from FW/HW Version 03/03
Description
Opens a page with general I/O module parameters such as
device name, MAC address, device role, etc. These
parameters can be modified here and loaded to the 750-644
I/O module (see section "Settings").
Opens a page with device lists. Configured and linked devices
within range are displayed with MAC address and name and
configured (see section "Net Forming").
Opens a page for the allocation of slave process data to slots
in the master (see section "PI Mapping").
Opens a page for viewing the process data while uploading
and downloading. The "Block Transfer" menu item is only
displayed in "Configuration" mode (see section "Block
Transfer").
Opens a page with comprehensive diagnostic information on
the status of the 750-644 I/O module and the network, as well
as the connection quality (see section "Diagnostics").
NOTICE: The Diagnostics menu item only appears in
"Communication" mode.
Commissioning 77