WAGO-I/O-SYSTEM 750
®
750-644 Bluetooth
RF-Transceiver
Table 47: Representation of a slot
Setting
The master process image is displayed graphically below the slot configuration
with a breakdown of the slots:
Figure 35: Slot assignment
8.1.5.4
Block Transfer
The Block Transfer page displays the configuration block when uploading and
downloading of the process data. The Block Transfer menu item is only
displayed in "Configuration" mode.
Manual
Version 2.0.0, valid from FW/HW Version 03/03
Description
Slot identification (1 ... 7 real-time, 8 ... 13 ad-hoc)
Display of the "UserFriendlyName", if given
Selection of the slot color for the graphical representation at the
bottom (see figure "Screenshot of the PI Mapping page")
Slider for the size of the process data byte (cut-off size)
assigned to a slot
Input field for the size of the process data byte (cut-off size)
assigned to a slot
Offset in bytes to the start of the slot (no control/status byte or
internal byte)
NOTICE: Values for the ad-hoc devices are not currently
displayed correctly.
Commissioning
85