Adding The 750-644 I/O Module To The Pc Device List; Figure 49: Add I/O Module To The Pc - WAGO I/O-SYSTEM 750 Manual

WAGO-I/O-SYSTEM 750
®
750-644 Bluetooth RF-Transceiver
Cutoff Ad hoc Devices (Bytes) list: Set the cut-off for slot 8 to the value
8.
"10".
9. Transfer the settings concerned to the 750-644 I/O module by pressing the
[Write] button in the toolbar.
10. Change the mode by clicking the [Communication (Ad hoc)] button in the
Operation Mode area.
9.4.3

Adding the 750-644 I/O Module to the PC Device List

1. Right-click on the Bluetooth
Select Show Bluetooth Devices in the context menu.
2.
Press the [Add a Device] button. A list of found devices is displayed.
3.
4. Double-click on the 750-644 I/O module in the list. It lists the name that you
assigned during the configuration, i.e. "My644" in this example:

Figure 49: Add I/O module to the PC

2. Enter the pairing code you assigned to the 750-644 I/O module during the
configuration, i.e. "0000" in this example.
Manual
Version 2.0.0, valid from FW/HW Version 03/03
®
icon in the system tray.
Example Configuration 111