WAGO I/O-SYSTEM 750 Manual page 107

WAGO-I/O-SYSTEM 750
®
750-644 Bluetooth RF-Transceiver
3. Invert bit RA (Receive acknowledgement) in the control byte of the ad-hoc
slot for the 750-644 I/O module to signal successful acquisition of the data.
In this example, you should write byte 2 in the output process image with
the value "0x02".
You can now exchange more data between the Bluetooth
the 750-644 I/O module.
For further information on data exchange, see section "Process Image" > ... >
"'Ad-hoc Communication' Mode".
Pos : 81.4 /Dokumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
Manual
Version 2.0.0, valid from FW/HW Version 03/03
Example Configuration
®
module 757-801 and
107