Figure 52: Example Of Data Exchange Via Hterm And Wago-I/O-Check 3; Table 70: Com Port Settings - WAGO I/O-SYSTEM 750 Manual

WAGO-I/O-SYSTEM 750
®
750-644 Bluetooth RF-Transceiver

Table 70: COM port settings

Description
Bits per second
Data bits
Parity
Stop bits
Flow control
5. Launch the terminal program, e.g. Hyperterminal, HTerm or Realterm.
6. Select the COM Port that you noted.
7. Set the baud ("Bits per second"), data ("Data bits"), stop ("Stop bits") and
parity ("Parity") (see table "COM port settings").
8. Establish the connection. You can now exchange data between the terminal
program on your PC and the 750-644 I/O module.

Figure 52: Example of data exchange via HTerm and WAGO-I/O-CHECK 3

Pos : 82 /D okumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
Manual
Version 2.0.0, valid from FW/HW Version 03/03
Example Configuration
Value
115200
8
None
1
None
113