Deleting Access Permission For A Device - WAGO I/O-SYSTEM 750 Manual

WAGO-I/O-SYSTEM 750
®
750-644 Bluetooth RF-Transceiver
Conditions
Mailbox size
6
●
Request
Byte
0
1
2
Arguments
Parameters
MBX_TARGET_TABLE
_AND_INDEX
Response
Byte
0
1
Return values
Parameters
MBX_RESULT
12.3.6.7

Deleting Access Permission for a Device

UnbindRemoteDevice, 0x86
The access permission of a remote device is disabled. When this happens, the
MAC ID entered in the table space and associated data such as the
"UserFriendlyName" are retained, but no connection to the device is established
and any already existing connection is interrupted. If the command is executed in
"Communication" mode, this setting is temporary, i.e. at the next reboot, the
connection is once again established. This offers the possibility of temporarily
excluding fault remote devices from the network without changing the
configuration. If no attempt is made to connect the device after reboot, the
command must be called up in the "Configuration" mode.
Manual
Version 2.0.0, valid from FW/HW Version 03/03
12 18 Config. Real-time Ad-hoc Master Slave
● ● ●
7 6
2 2
T
MBX_TARGET_TABLE_AND_INDEX
Value
Bit 0 ... 3 Table index
Bit 4 ... 7 Target table
7 6
2 2
T
Value
MBX_CMD_OUT_OF_RANGE
MBX_CMD_INVALID_ARG
MBX_CMD_GENERAL_ERROR
Mode Device role
- -
5 4 3
2 2 2
MBX_BINDREMOTEDEVICE
-
Description
Index 0 ... 6 for 750-644 I/O modules of slots 1 ... 7
Index 0 ... 5 for Bluetooth
8 ... 12
"2" for WAGO_DEVICE (slots 1 ... 7)
"1" for EXTERNAL_DEVICE (slots 8 ... 12)
5 4 3
2 2 2
MBX_BINDREMOTEDEVICE
MBX_RESULT
Description
An index greater than 6 was used.
No valid target table has been chosen.
The selected entry does not contain a
valid MAC ID.
Appendix
Save
config.
● ● ●
2 1
2 2
®
SPP devices of slots
2 1
2 2
175
Reboot
-
0
2
0
2