Table 49: General Status Displays - WAGO I/O-SYSTEM 750 Manual

88 Commissioning

Table 49: General status displays

Status
Device Role
Operation Mode
Communication
Profile
Diagnostic State
Network State
[Start Diagnostics]
[Stop Diagnostics]
The link quality for each slot is displayed under "Channel Monitor":
Value Description
Slave Device take the "slave" role
Master Device take the "master" role
(see also appendix "Read Role of the
Local Device")
Communication Device is in "Communication" mode
(see also appendix "Read Local
Operating Mode")
Real-time Device is in "Real-Time
profile Communication" mode
Ad hoc profile Device is in "Ad-hoc Communication"
mode
Ok No warnings / errors
Warning Warning
Error General error
Critical defect Critical defect (for details, see appendix
"Read Status of the Local I/O Module")
Ok Configured network is established.
Inconsistent Not all configured connections are
established.
Faulty Faulty, configured network is not (yet)
established (for details, see appendix
"Read Status of the Wireless Network")
Starting value monitoring
Stopping value monitoring
Version 2.0.0, valid from FW/HW Version 03/03
WAGO-I/O-SYSTEM 750
®
750-644 Bluetooth RF-Transceiver
Manual