Figure 53: Screenshot Wago I/O-Check - Start Diagnostics; Figure 54: Status Query For Slot 1 - WAGO I/O-SYSTEM 750 Manual

WAGO-I/O-SYSTEM 750
®
750-644 Bluetooth RF-Transceiver
Figure 53: Screenshot WAGO I/O-CHECK – Start diagnostics
You can start various queries:
• To query the current values continuously:
1. Click the [Start Diagnostics] button.
2. Click the [Stop Diagnostics] button to stop the query and to display the
• To query status information for individual slots or all existing connections:
1. Right-click on the last column of the table. A dialog appears:
2. Select an Object Group.
3. Click the [Execute] button.
4. Click [OK] to close the dialog.
Manual
Version 2.0.0, valid from FW/HW Version 03/03
The values are continuously queried and displayed in the Channel
monitor table.
status last received without updating again:

Figure 54: Status query for slot 1

Diagnostics 115