Establishment Of The Object Id - WAGO I/O-SYSTEM 750 Manual

WAGO-I/O-SYSTEM 750
®
750-644 Bluetooth RF-Transceiver
Return values
Parameters
MBX_CMD
_RESULT
MBX_OBJECT
_ID
MBX_STATE
_MESSAGE
12.3.7.4

Establishment of the Object ID

The object ID is composed of a group ID and a target ID.
• The group ID identifies the functional group for which the status is to be
queried.
• The target ID indicates the target for which the status is to be queried. Either
all existing connections (0x0000) or individual connections (0x0001 to
0x0007) can be chosen.
Manual
Version 2.0.0, valid from FW/HW Version 03/03
Value
MBX_CMD_DENIED_NOT_IMPLEMENTED
MBX_CMD_DENIED_BUSY
MBX_CMD_INVALID_ARG
See section "Establishment of the Object ID".
MBX_STATE_OK
MBX_STATE_OK_CONFIG_CHANGED
Error messages
MBX_STATE_ERROR_UNSPECIFIED
MBX_STATE_ERROR_WATCHDOG
MBX_STATE_ERROR_CREATE_LINK
MBX_STATE_ERROR_LOST_LINK
MBX_STATE_ERROR_PASIZE_WRONG
MBX_STATE_ERROR_SYSTEMBUS_JAM
MBX_STATE_ERROR_SYSTEMBUS
_INTERRUPTED
MBX_STATE_ERROR_MAILBOX
_COMMAND
MBX_STATE_ERROR_NETWORK
_CONFIG
Warnings
MBX_STATE_WARNING_UNSPECIFIED
MBX_STATE_WARNING_WATCHDOG
MBX_STATE_WARNING_LESSTHEN_54
_CHANNELS
MBX_STATE_WARNING_LESSTHEN_39
_CHANNELS
MBX_STATE_WARNING_BER_MEDIUM
MBX_STATE_WARNING_BER_HIGH
MBX_STATE_WARNING_REMOTE
_MAILBOX
Appendix
Description
Non-implemented
MBX_OBJECT_ID
Another MBX
command actively
being processed
Invalid object ID
0x0000 No error
0x0001 Configuration
changed, but not yet
saved
0x1000 Not specified
0x1001 Watchdog
0x1002 Connection errors
0x1003 Connection interrupted
0x1004 PI defective
0x1005 Internal
communication
overallocated
0x1006 Interruption in internal
communication
0x1007 Error in Mailbox
communication
0x1008 Error in the network
configuration
0x2000 Not specified
0x2001 Watchdog
0x2002 Less than 54 channels
available
0x2003 Less than 39 channels
available
0x2004 BER is moderate
0x2005 BER is high
0x2006 A remote Mailbox is
active; data in the PI
may be obsolete.
189