WAGO-I/O-SYSTEM 750
®
750-644 Bluetooth
RF-Transceiver
Click the [Identify] button on the toolbar of the window. Your node
2.
configuration is displayed graphically (see figure "Identifying the Node
Configuration").
3.
Right-click on the 750-644 I/O module that you want to configure as the
slave.
4.
Select Settings in the context menu of the 750-644 I/O module to open the
Bluetooth
figure "Bluetooth
Figure 42: Bluetooth
Restore to factory settings!
The following steps require that the 750-644 I/O module remain intact, i.e. no
configuration has been attempted. If not the case, click the [Factory Settings]
button in the toolbar to restore the 750-644 I/O module to its factory settings.
Click the [Configuration] button in the toolbar. A dialog appears:
5.
Manual
Version 2.0.0, valid from FW/HW Version 03/03
®
specific parameterization dialog of the 750-644 I/O module (see
®
specific parameterization area").
®
specific parameterization area (example)
Example Configuration
93