9.1.1.2.3 Assigning Process Data; Figure 46: Screenshot Pi Mapping - WAGO I/O-SYSTEM 750 Manual

WAGO-I/O-SYSTEM 750
®
750-644 Bluetooth RF-Transceiver

9.1.1.2.3 Assigning Process Data

Skipping action steps
If the Bluetooth
figure "Screenshot of PI Mapping").
1. Right-click on the 750-644 I/O module (master).
2. Select Settings in the context menu. A new window opens for configuring
the 750-644 I/O module concerned.
3. In the navigation, select the PI Mapping menu item.
The process data assignment is loaded from the 750-644 I/O module and
graphically displayed in WAGO-I/O-CHECK.

Figure 46: Screenshot PI Mapping

4. Move the slider for the first slave to the right so that the first slave is
assigned the maximum possible number of bytes in the master's process
image.
Click the [Write] button in the toolbar to write the modified configuration
5.
to the 750-644 I/O module.
Click the [Communication (Realtime)] button in the Operating Mode area
6.
to specify the operating mode.
The example configuration is completed.
Manual
Version 2.0.0, valid from FW/HW Version 03/03
®
parameterization window is still open, begin with step 3 (see
Example Configuration 97