WAGO-I/O-SYSTEM 750
®
750-644 Bluetooth
RF-Transceiver
Table 50: Transmission channel status
Status
Slot No.
Connect
Bit error rate
Signal strength
Available
channels
If you click a field in the last table column, a dialog appears with the detailed
status of the selected slot:
Mark the checkbox for all connections to query the status of all slots.
1.
Figure 38: Status query for slot 1 dialog
2.
You can limit the status messages by selecting a specific Object Group
(see table "Object groups and possible status messages").
Manual
Version 2.0.0, valid from FW/HW Version 03/03
Value
Slot _
Yes
No
No
0 %
0.1 ... 10 %
>10 %
-127 ... 0
0
0 ... +127
<39
39 ... 53
>53
Description
Slot number
Connect
Not connected
No device configured for this slot
No bit errors have occurred
Some bit errors have occurred
High bit error rate
RSSI value/signal strength too weak
Signal strength very good
Signal strength too strong (see appendix
"Read Signal Strength for a Connection")
Too many busy/faulty channels
Some busy/faulty channels
Open/uninterrupted channels (low
interference) (see appendix "Read
Available Hopping Channels")
Commissioning
89