Settings; Scratch Correction / Scanning Crop; Scanner Settings - AGFA d-lab.3 Technical Documentation Manual

Settings

Scanner Settings

Scratch correction / scanning crop

Call up:
–
Settings
Machine settings
Scanner
Activate / deactivate Scratch correction
–
If the scratch correction is active, dense areas
of a negative that includes underexposed areas
as well may show color drifts.
Scratches can be corrected that are caused, for
example, by dust in the camera or in the film
drive. Deep scratches and holes cannot be
corrected.
Depending on the extent of the scratches on
the film, the printing procedure may take very
long (computing time).
Scanning crop / Slide crop
–
Preset on 98%. This value identifies the part of
the scanned negative / slide on the CCD that
has to be printed. If the value is increased, the
prints may get black borders.
Reset to standard
–
Reset modified values to 98%, if necessary
Save
–
4.26
2003-06-01 /PN 9008
Operation
031
AGFA d-lab.3