Paper Configurations - AGFA d-lab.3 Technical Documentation Manual

Settings

Paper Configurations

see also Print Sizes on the following page
A paper configuration consists of a paper setting
each (width) and a surface. The cut length of the
paper is kept independent of the paper
configuration, and it can be assigned to an order
configuration in the Order menu.
Call up:
–
Settings
Print configurations
Paper
Creating a paper configuration:
New or Edit
–
Select Paper settings / Surface
–
The paper settings and surfaces created before
in the Machine settings are now offered.
Switches for the paper magazine change
–
Switches 1-4 paper width
Switches 5-6 surface
The switch positions are defined under
Settings / Machine settings / Surfaces and
Paper settings. They cannot be modified here.
Every switch combination of the magazine
switches may only be used once!
Save or Save as
–
Rename paper configuration:
Rename and enter a new name
–
OK
–
4.54
2003-06-01 /PN 9008
Operation
311
088
AGFA d-lab.3