AGFA d-lab.3 Technical Documentation Manual page 145

Operation
Package
Any combination of order configurations. If a
configuration with more than 2 paper widths is
used for printing, the request may come up to
change the paper magazine.
Select Film carrier and Film type
–
Set the Configuration type Package
–
Select sub-configurations or set to OFF
–
Change PpF (No. of prints per frame):
–
Presetting = 1
(possible range 0...999)
Index, Back print, Autosave
–
The settings made here are applied; the
settings in the single configurations on which
they are based are ignored.
Select configurations
–
Only order configurations are offered which
match the selected film carrier and are no
packages themselves (the latter cannot be
packed any further) and in which PpF is not
zero.
Add configurations to the selection list with
remove them with
Save or Save as
–
For the Standard button see Defining a
configuration as standard configuration
AGFA d-lab.3
,
2003-06-01 /PN 9008
Settings
096
4.73