AGFA d-lab.3 Technical Documentation Manual page 143

Operation
Film carrier: IX240
Select sub-configurations or set to OFF
–
PpF (no. of prints per frame)
–
Presetting = 1
(possible range 0...999)
Border, as above
–
4-60 mm or 0 for borderless
Paper config. and Cut length for the sizes
–
Classic, High Vision and Panorama
Save or Save as
–
Ignoring the IX240 coding of the camera
Three different print sizes can be selected and
saved by the customer on an IX240 film.
The selected size is saved optically or
magnetically on the associated frame. The saved
data is read on the d-lab and every negative is
printed in the coded size. Prerequisite for this is a
mixed film configuration for all print sizes.
Always the APS full frame is exposed on the film,
no matter which aspect ratio was selected on the
camera.
It is therefore possible to ignore the camera
coding and print a different size.
For this purpose, three more configurations
–
must be created in addition to the mixed film
configuration:
Paper configurations and cut lengths of all
–
3 sizes for High Vision (A)
Paper configurations and cut lengths of all
–
3 sizes for Classic (B)
Paper configurations and cut lengths of all
–
3 sizes for Panorama (C)
AGFA d-lab.3
Print sizes
High Vision
Classic
Panorama
2003-06-01 /PN 9008
Settings
022_aps
Aspect ratio
16:9
3:2
1:3
4.71