Single; Package - AGFA d-lab.3 Technical Documentation Manual

Operation
Select the Configuration type:
The configuration type can only be set up with
new creation of an order configuration; the type
cannot be changed with edit.

Single

–
Single order configuration

Package

–
Several order configurations are packed in one
package to print different sizes (frame, file print)
in one go. This means that single must be
created before.
Combiprint
–
Configurations for multiple printing of a picture
in different sizes or the same size (ID/passport
photos) on one sheet of paper.
Combiprints cannot be included in a package
configuration.
Reproduction
–
This order configuration will switch off all
functions of the Agfa image enhancement so
that the prints correspond exactly to the
original. This also refers to the computing of the
print size. The printed image corresponds
precisely to the original: In case of deviating
sizes there is a border or loss of image
information.
Application example: Prints created with
programs like Photoshop or shots artificially
falsified.
Also see dTFS preselection.
The package configurations will be described after
the single configurations; see Package.
For the Standard button see Defining a
configuration as default configuration in this
Register.
AGFA d-lab.3
2003-06-01 /PN 9008
Settings
022_type
4.69