Settings
User Administrator: Defining Users and User Rights
The settings under User interface should be
entered before, as they are needed for the user-
specific settings.
Any number of users can be defined, but at least 2
are necessary.
1. Administrator with user rights for all functions,
except Service
2. Service with unlimited rights:
All functions + Service
Call up:
–
Settings
Machine settings
User manager
New
–
The next screen opens, see the following figure
and description
Edit
–
Select the user in the list and touch Edit to
change the corresponding settings. The next
screen opens, see the following figure and
description
Password, Repeat
–
The password (max. 4 digits) is defined for new
users by double entry. An Old password of an
existing user can be changed in the same way.
Language, Keyboard, Preview freq., Beep
–
touch
The entries made in the User interface are
displayed (see previous page). These general
settings can be adjusted for each individual
user.
The passwords entered for the machine cannot be
read or reset anywhere outside this menu! If the
password for a user is forgotten the corresponding
settings cannot be changed any more!
4.18
2003-06-01 /PN 9008
Operation
305
036
AGFA d-lab.3