Dx Corrections - AGFA d-lab.3 Technical Documentation Manual

Operation

DX corrections

Touch DX correction
–
The DX configuration screen is opened.
New or Edit
–
Enter the DX code in the following format:
–
123-456
Set correction values for normal, over and
–
under exposures with the regulators
Touch Save as and enter a name for the DX
–
configuration.
The Save button is only active when the screen
has been called up with Edit.
The name of the DX configuration appears in
the configuration list.
If the DX code is detected while a film is inserted,
the appropriate corrections become effective.
AGFA d-lab.3
2003-06-01 /PN 9008
Settings
313
dx_conf
4.45