Calendar: Defining Off Days; Installing The Software - AGFA d-lab.3 Technical Documentation Manual

Operation

Calendar: Defining off days

Call up:
–
Settings
Machine settings
Startup
Edit calendar
Select year / month with the arrow keys
–
Define off days:
–
holidays, company holidays
black workdays
–
blue off days
–
OK
–

Installing the Software

Call up:
–
Settings
Machine settings
Install software
Touch Load CD or mark the software
–
component to be enabled in the list (see also
the following section Enabling software)
Touch Install: Safety check whether the
–
settings were saved on an external data carrier.
If No the operation is stopped; if Yes the input
screen opens:
If load CD was touched: Enter the serial
–
number
If a software component is selected in the
–
list:
Enter the enable code received from Agfa.
The software is installed / enabled. Then a new
start is enforced.
Update the machine software:
–
If the machine does not function correctly
afterwards, restore the status before the update
with Preversion.
AGFA d-lab.3
2003-06-01 /PN 9008
Settings
084
058
4.21