AGFA d-lab.3 Technical Documentation Manual page 172

Tests
− Call up:
Test
Control strip
Chemical control strip
Then a prompt pops up to insert the chemical
control strip.
− Place the control strip box in the holder
provided for this in the lower area of the lane
distributor.
− Close the Printer door and touch Continue
(or terminate the operation with Cancel).
The control strip is transported into the Paper
Processor.
− Send in the process control strips for
evaluation.
5.18
2003-06-01 /PN 9008
Operation
dlab2195
AGFA d-lab.3