Portraits - AGFA d-lab.3 Technical Documentation Manual

Production

Portraits

Portraits my come out too sharp, this may be
recognized e.g. when the person on the print looks
older.
Cause:
Sharpening of individual pixel due to the system
Remedy:
Change the following settings in the correction
configuration of the respective order configuration:
– Area contrast
– Detail contrast
– Sharpness - edges
– Saturation
This does not cure the problem as such, but it
corrects the prints to an acceptable result.
6.26
2003-06-01 /PN 9008
+1
0
–4
–1
Operation
AGFA d-lab.3