Accessing The Show Settings Menu - AGFA DRY 1.4 Reference Manual

14 | DRY 1.4, DRY 2.4 | Advanced Operation (key-operator mode)

Accessing the Show settings menu

1. Press the Key-operator key to enter the Key-operator mode.
2. On the Key-operator main menu, press the Confirm key to select 'Show
settings'.
The Show settings menu is displayed:
5 Restore config.
6 Calibration
7 Service Actions
8 Quality Control
9 Installation
3. Press the Escape key to return to the Key-operator main menu.
4. Press the Escape key again to quit the Key-operator mode.
3630B EN 20210520 0952
Visible
Reachable with Up/Down arrow keys
Note: This menu is the starting point for viewing printer
information (see next pages).