Coding The Paper Magazine - AGFA d-lab.3 Technical Documentation Manual

Production

Coding the Paper Magazine

Set the paper magazine coding to the desired
paper width and surface as indicated on the
sticker. Meaning of the coding:
Slide closed
■
Slide open
PATTERN
PAPER SIZE
3.25 inch (82 mm)
3.50 inch (89 mm)
3.75 inch (95 mm)
4.00 inch (102 mm)
4.50 inch (114 mm)
4.75 inch (120 mm)
5.00 inch (127 mm)
6.00 inch (152 mm)
6.50 inch (165 mm)
7.00 inch (178 mm)
8.00 inch (203 mm)
8.25 inch (210 mm)
* For switch positioning see New paper width on
the following page.
The table shows the Agfa standard.
If required: Change the switch allocation for the
paper widths and surfaces.
Four different surfaces at the most can be used
equally for all widths. This only concerns the
surface names and the coding. Chemically, the
surfaces need not be equal for the different paper
widths as the PBLs are created and saved
independent of each other for each single
combination of all 6 switches.
6.4
2003-06-01 /PN 9008
1 2
* *
3 4
* *
GLOSSY
MATTE
CUSTOM1
CUSTOM2
Operation
5 6
AGFA d-lab.3