Printer Settings - AGFA d-lab.3 Technical Documentation Manual

Operation

Printer Settings

Call up:
–
Settings
Machine settings
Printer
Overlapping (0 to 10%)
–
The value indicates by how many per cent the
digitized image is calculated greater than the
paper to be exposed.
Master Paper
–
Define the paper used most frequently as
master paper. The MBL is performed on this
paper.
Activate / deactivate Auto-MBL
–
MBL max. rep. (1 to 10)
–
In case Auto-MBL has been activated: Enter
how often the MBL test should be repeated
automatically if the result is not in tolerance.
PBL max. rep. (1 to 10)
–
Enter how often the PBL test should be
repeated automatically if the result is not in
tolerance.
Prints without any white/black borders can be
obtained with the following setting:
1. Overlapping 3%
2. Scanning crop / Slide crop 98% (see next
page)
AGFA d-lab.3
2003-06-01 /PN 9008
Settings
037
4.25