How To Change Configuration And Order Number; Display Of The Current Configuration; Changing The Current Configuration; Production - AGFA d-lab.3 Technical Documentation Manual

Production

How to Change Configuration and Order Number

Display of the current configuration

– Touch Show configuration:
All details about the current configuration and
the pertaining sub-configurations as well as all
other settings are listed.
Modifications are not possible in this screen.

Changing the current configuration

The selected configuration can be changed
temporarily for the current order. The
modifications are not saved in the configuration.
Modifications for a running order (film inserted) are
not possible. Modifications can only be entered
before the next order is started.
The modifications become effective only after the
screen called up with Change Config. is left again.
Only then should the film be inserted, otherwise it
will be printed with the settings that were valid
before the modification was entered.
– Touch Change Configuration or select a
different configuration in the selection box (see
next title Selecting a different configuration).
– Change the settings as desired and confirm
with OK. They are not saved, but only apply to
the current order / image.
6.18
2003-06-01 /PN 9008
Operation
049
AGFA d-lab.3