Combiprint Configurations - AGFA d-lab.3 Technical Documentation Manual

Operation

Combiprint Configurations

These configurations can be used for multiple
printing of an image in different sizes or the same
size on one sheet of paper (passport/ID photo).
Combiprints cannot be priced separately. If special
prices are to be defined for this, we recommend to
use a format which is usually not used, e.g.
102x154.
Call up:
–
Settings
Print configurations
Combiprint
Select Film mask
–
All layouts are listed (no filters) or only the
those layouts that match the selected film
carrier.
New or mark the layout file and Edit
–
Layout
–
All layouts are listed that are available for the
selected film mask (filter).
Paper Config.
–
All paper configurations with a width which
corresponds to the width and length of the
layout can be selected.
Cut length
–
All specified cut lengths are listed. The
presetting is arranged such that it makes
sense: If the paper config. corresponds to the
width (length) of the layout, the cut length will
be set that comes closest to the length (width)
of the layout pattern.
Enter Save or Save as and the name.
–
AGFA d-lab.3
2003-06-01 /PN 9008
Settings
352
351
4.67