AGFA d-lab.3 Technical Documentation Manual page 142

Settings
Single
Select Config. type: Single
–
Film carrier: 135, 120, 110
Select sub-configurations or set to OFF
–
PpF (no. of prints per frame)
–
Presetting = 1
(possible range 0...999)
Border
–
4-60 mm or 0 for borderless
Paper config. and Cut length for full frame
–
(FF) and Panorama
Save or Save as
–
Film carrier: File print
Sub-configurations, PpF, Border, Paper
–
config. and Cut length as above (see film
carriers: 135, 120, 110)
Fit image to paper (standard): The whole
–
image remains unchanged, the border is
added.
Fill print size: Center cropping; image
–
information getting lost.
Force: Shorter side / Longer side: The whole
–
image is kept; variable cut length. One side of
the digital image is adjusted to the paper width:
Shorter side or longer side.
Save or Save as
–
The d-lab calls up completely prepared network
orders (image files plus order description) during
the idle times or when requested by the user,
which are then printed automatically.
Prerequisites:
Order configurations corresponding to the
descriptive order file must be available on the
d-lab. These are configurations for which the
option File print was selected in the selection box
Film carrier.
4.70
2003-06-01 /PN 9008
Operation
022_sing
022_dp
AGFA d-lab.3