L O G G I N G O N A N D F A M I L I A R I Z A T I O N
2
Logging on using Profiles
4.
5.
E
DITING THE
The MAXPRO NVR user interface includes a provision to modify the port number associated to
the following components:
To edit the ports
1.
2.
3.
PORT FORWARDING
The Port Forwarding feature is generally used when an Internet client wants to connect to a
particular computer in a private Local Area Network (LAN). This feature is enabled by defining
port forwarding rules in the Router. By defining these rules, you can send data using the range
of ports on the internet side to a port and IP addresses on the private LAN network.
S
CENARIOS OF
Scenario1- Services mapped to different ports
Two NVRs in a private LAN are configured behind the router, and all the services on the NVRs
are running on the default ports. In the router's port forwarding section we need to map the
ports for each of the services running in the NVR's. An internet MAXPRO NVR client can
connect to a NVR, by specifying the public IP address given to the router and corresponding
ports mapped in the port forwarding table in the router .
22
Click Remove.
Click OK. The profile is deleted.
P
ORTS
•
Trinity Server
•
Trinity Controller
•
NeoEngine Server
In the Server Settings dialog box, click Edit Ports. The port numbers associated to Server
IP/Name, Controller IP/Name and Storage Engine IP/Name are enabled for editing.
Figure 2-3
Editing the Ports
Change the port numbers as applicable.
Click Save.
P
F
ORT
ORWARDING
MAXPRO NVR Operator's Guide