Updating A User; Deleting A User - Honeywell MAXPRO Operator's Manual

13.
14.
U
You can modify the settings of a user to change the user ID, password, role, description,
IsWindowsUser flag, and email address. You can update user settings only if you have admin
rights.
To update a user
1.
2.
3.
4.
5.
D
You can remove a user from MAXPRO NVR. When you delete a user, all the associations
made to the user are also removed.
To delete a user
1.
2.
3.
4.
5.
MAXPRO NVR Operator's Guide
Click the Camera Event Association tab to associate camera events to the user.
• To associate one particular event, under the Available List, select the check box
corresponding to the event and then click >. The select camera event appears under
the Associated List.
• Click >> to associate all the camera events to the Associated List.
• To remove an event, under Associated List, select a check box corresponding to
the event and then click <. The selected camera event appears under the Available
List.
• Click << to disassociate all the camera events to the Available List.
Click Save to save the information.
Note:
You can add a maximum of 10 users in MAXPRO NVR.
U
PDATING A SER
Click the Configurator tab. The System page displays by default.
Click the User tab to navigate to the User page.
Select the check box corresponding to the user you want to modify.
Change the settings such as user name, user description, and so on.
Click Save.
U
ELETING A SER
Click the Configurator tab. The System page displays by default.
Click the User tab to navigate to the User page.
Select the check box corresponding to the user you want to delete.
Click Delete. A confirmation message appears at the bottom of the display area.
Click Yes.
C O N F I G U R I N G M A X P R O N V R
55