Operations In Live View; Switching Between Channels; Main/Aux Output Switching - Honeywell HRGX45 User Manual

Operations in Live View

Switching Between Channels

In full screen display mode, you can switch between channels manually or you can use the
auto-switch function to automatically cycle through each channel's video feed at predetermined
intervals.
To manually switch to the next channel, do one of the following:
•
•
To automatically cycle through the channels:
•
To stop cycling through all the channels:
•

Main/Aux Output Switching

You can access certain live view mode features using an auxiliary monitor. These features
include Single Screen, Multi-screen, Previous Screen, Next Screen, and Quick Set
(see
When HDMI/VGA output is configured as the main output, you can switch to Main BNC output
by double-clicking the mouse wheel anywhere on the screen. The message "Double-click the
mouse again to switch the auxiliary and main output?" appears. Double-click the mouse wheel
again to continue, or click Cancel to cancel the operation.
To switch back to the main HDMI/VGA output, right-click on the screen in live view mode to
display the shortcut menu, and then click Main Monitor.
Note Before you can use the auto-switch function, you must set the dwell time.
See Configuring General Display Settings, page
Scroll down with your mouse. (Scrolling up switches to the previous channel.)
Right-click anywhere on the screen to display the shortcut menu, and then click Next
Screen.
Right-click anywhere on the screen to display the shortcut menu, and then click Start
Auto-switch.
The DVR starts automatically cycling through each channel. The period of time each
channel's video feed appears on the screen is determined by the dwell time you specified
in the Display Settings.
Right-click anywhere on the screen to display the shortcut menu, and then click Stop
Auto-switch.
Shortcut Menu, page 36).
Viewing Live Video | 43
39.
800-16694 - A - 04/2014