Figure 45: Removing The Card From The Anti-Static Bag - Allied Telesis AlliedWare Plus Installation Manual
Gigabit layer 3 ethernet switches
Hide thumbs
Also See for AlliedWare Plus:
- Overview (40 pages) ,
- Overview (1 page) ,
- Configuration manual (29 pages)
Table of Contents
Advertisement
Chapter 5: Installing AT-StackQS and AT-x9EM/XT4 Cards
108
7. Remove the AT-StackQS or AT-x9EM/XT4 Card from the anti-static
bag. Refer to Figure 45.
Figure 45. Removing the Card from the Anti-static Bag
8. Carefully align the card in the slot and slide it into the switch. The left
edge of the card fits into the slot in the bottom corner of the switch.
Refer to Figure 46 on page 109.
Advertisement
Table of Contents
