A Part Program Section Between A Start Label And The Key Word: Endlabel - Siemens SINUMERIK 840D sl Function Manual

Hide thumbs Also See for SINUMERIK 840D sl:

Table of Contents

K1: Mode group, channel, program operation, reset response

9.9 Program operation

A part program section between a Start label and the key word: ENDLABEL

Functionality

Via REPEAT in part program block N150, the part program processing branches to the part

program block N120 that is labeled START_1 with a start label. This part program block and

all the part program blocks up to and including the part program block marked with the key

word ENDLABEL (N140) are repeated x number of times. If P is not specified, the part program

section (N120 - N140) is repeated exactly once. After the last repetition, the part program is

continued with the part program block N170 following the REPEATinstruction.

N120 START_1: ...

N140 ENDLABEL: ...

N160 REPEAT START_1 END_1 P=n

Label search direction

The program section marked with the Start and End labels can come before or after the

REPEATinstruction. The search initially commences toward the start of the program. If the Start

label is not found, a search is made in the direction of the program end.

If no keyword ENDLABEL is located between the Start label and the REPEAT instruction, the

part program section from the Start label to the REPEAT instruction is repeated.

; Start label: START__1

; End label: Keyword ENDLABEL

; Repetition: START_1 until END_1

REPEAT <Label> [P=n]

Start label to which the instruction: REPEAT branches.

Beginning of the part program section that is repeated.

Type: String

Number of repetitions

Type: Integer

Function Manual, 01/2015, 6FC5397-0BP40-5BA2

Basic Functions

Show Quick Links

Table of Contents

Sinumerik 828d Sinumerik 840de sl