Siemens SINUMERIK 840D sl Function Manual page 233

Meaning
CTOL:
OTOL:
ATOL:
<axis>:
<value>:
Notes
● The channel-specific tolerance values programmed with CTOL and OTOL have higher priority than
● With end of program or reset, the tolerance value parameterized in the machine or setting data is
Basic Functions
Function Manual, 01/2015, 6FC5397-0BP40-5BA2
Programmable contour tolerance
Preprocessing
stop:
Effective:
Programmable orientation tolerance
Preprocessing
stop:
Effective:
Programmable axis-specific contour tolerance
Preprocessing
stop:
Effective:
Name of the channel axis to which the programmed tolerance will apply
Tolerance value
Value range:
the axis-specific tolerance values programmed with ATOL.
effective again.
B1: Continuous-path mode, Exact stop, Look Ahead
No
Modal
No
Modal
No
Modal
≥ 0: Tolerance value
< 0: Resetting the programmed tolerance value ⇒ The tolerance
value parameterized in the machine or setting data applies again.
4.6 Contour/Orientation tolerance
233