Siemens SINUMERIK 840D sl Function Manual page 960

P3: Basic PLC program for SINUMERIK 840D sl
13.17 Block descriptions
Parameterization of the tool properties
The properties of the searched for tools are set in the BTSS block TF (parameterization, return
parameters from TMGETT, TSEARC ) via the following variables:
● "parMask<X>" (parameterization input screen)
● "parData<X>" (comparison values)
With <X> = TAD, TAO, TAS, TD
Result list
After completion of the PI service without errors, the search result is located in the BTSS block
TF (parameterization, return parameter from TMGETT, TSEARC) in the following variables:
● "resultCuttingEdgeNrUsed" (D numbers of cutting edges used since last quantity count)
● "resultNrOfCutEdgesUsed" (number of cutting edges since last quantity count)
● "resultNrOfTools" (number of found tools)
● "resultToolNr" (T numbers of found tools)
● "resultToolNrUsed" (T numbers of cutting edges used since last quantity count)
If no tool was found, the number of found tools is zero ("resultNrOfTools" == 0)
Search range specifications
From mag.
number
WVar1
#M<a>
#M<a>
#M<a>
#M<a>
#M<a>
#M<a>
#M<a>
#M<a>
960
From loca‐ To mag.
tion number number
WVar2 WVar3
#L<b> #M<x>
-1 #M<a>
-1
#L<b>
#L<b> #M<a>
#L<b> #M<x>
-1 #M<x>
-1 #M<x>
-1 -1
To location Description
number
The following magazine locations are
searched:
WVar4
#L<y> From: Magazine #M<a>, location #L<b>
to: Magazine #M<x>, location #L<y>
-1 From: Magazine #M<a>, first location
to: Magazine #M<a>, last location
-1 -1 From: Magazine #M<a>, first location
to: Last magazine, last location
-1 -1 From: Magazine #M<a>, location #L<b>
to: Last magazine, last location
-1 From: Magazine #M<a>, location #L<b>
to: Magazine #M<a>, last location
-1 From: Magazine #M<a>, location #L<b>
to: Magazine #M<b>, last location
#L<y> From: Magazine #M<a>, first location
to: Magazine #M<b>, location #L<y>
-1 From: Magazine #M<a>, first location
to: Magazine #M<x>, last location
-1 -1 From: First magazine, first location
to: Last magazine, last location
Function Manual, 01/2015, 6FC5397-0BP40-5BA2
Basic Functions