Pi Service: Tsearc - Siemens SINUMERIK 840D sl Function Manual

Description of formal parameters
Signal
PIService:
Unit:
WVar1:
WVar2:
Wvar3:
13.17.4.31

PI service: TSEARC

Function: Complex search using search screen form, depending on the parameter assignment
The PI service is used to search for tools with specific properties within a search range in one
or more magazines, beginning with a specific location, up to a specific location.
Note
Active tool management
The PI service is only available if tool management is activated.
Specification options
● Search direction
● Search for next tool with the specified property
● Search for all tools with the specified property
Result
As a result, a list with the internal T-numbers of the tools that are found is created.
Logic operations
For filtering properties, only one AND link is available as a linking option. An OR link must be
achieved by the user via several calls of the PI service and subsequent evaluation of the
individual results.
Basic Functions
Function Manual, 01/2015, 6FC5397-0BP40-5BA2
Type Value range
ANY "PI". TRESMO
INT 1, 2, 3 ... 10
WORD - max ... max
WORD 0, 1, 2 ... max.
WORD
P3: Basic PLC program for SINUMERIK 840D sl
Description
Reset monitoring values
TO area
Tool number
0: Process all tools
> 0:process specified tool
< 0: Process all sister tools
D number
< 0: Reset of the monitoring of the specified cutting
edge
0: Reset of monitoring of all cutting edges
Monitoring mode that is to be reset (all combina‐
tions are possible):
Bit 0 = 1: Tool-life monitoring
Bit 1 = 1: Quantity monitoring
Bit 2 = 1: Wear monitoring
Bit 3 = 1: Sum-offset monitoring
0: All active tool-monitoring functions ($TC_TP9).
13.17 Block descriptions
959