Siemens SINUMERIK 840D sl Function Manual page 546

K1: Mode group, channel, program operation, reset response
9.9 Program operation
4. Processing of the data part of the main program
5. Processing of the program part of the main program
Sequence when activated by an event: End of program
Initial state
Channel:
Mode:
1. In the channel, the end of program block is exchanged in the the executed program.
2. End of program is executed, evaluation of the following machine data:
– MD20110 $MC_RESET_MODE_MASK
– MD20150 $MC_GCODE_RESET_VALUES
– MD20152 $MC_GCODE_RESET_MODE
3. Implicit call of the parameterized user program as ASUB
4. A reset is executed in the channel, evaluation of the following machine data:
– MD20110 $MC_RESET_MODE_MASK
– MD20150 $MC_GCODE_RESET_VALUES
– MD20152 $MC_GCODE_RESET_MODE
Sequence when activated by an event: Channel reset
Initial state:
Channel:
Mode:
1. Control activates reset-sequence with evaluation of machine data:
– MD20110 $MC_RESET_MODE_MASK
– MD20150 $MC_GCODE_RESET_VALUES
– MD20152 $MC_GCODE_RESET_MODE
2. Implicit call of the parameterized user program as ASUB
3. Control activates reset-sequence with evaluation of machine data:
– MD20110 $MC_RESET_MODE_MASK
– MD20150 $MC_GCODE_RESET_VALUES
– MD20152 $MC_GCODE_RESET_MODE
546
Active
AUTOMATIC (optional: Overstore (active)
MDI
TEACH IN
Any
Any
Function Manual, 01/2015, 6FC5397-0BP40-5BA2
Basic Functions