Implicitly Output Auxiliary Functions - Siemens SINUMERIK 840D sl Function Manual

Program code
N1500 ENDIF
N1510
N1520 ELSE
N1540 WRITE(ERROR,FILENAME,ASSEMBLED)
N1550 ENDIF
N1560
N1570 ENDLOOP
N1580
N1590 LABEL1:
N1600
N1620 CALL FILENAME
N1630
N1650 DELETE(ERROR,FILENAME)
N1660 IF (ERROR<>0)
N1670 SETAL(61000+ERROR)
N1680 ENDIF
N1690
N1700 M17
8.14

Implicitly output auxiliary functions

Function
Implicitly output auxiliary functions are auxiliary functions which have not been programmed
explicitly and which are also output by other system functions (e.g. transformation selection,
tool selection, etc.). These implicit auxiliary functions do not lead to any system function;
instead, the M codes are collected according to output behavior parameters assigned to them
and/or are output to the PLC.
Basic Functions
Function Manual, 01/2015, 6FC5397-0BP40-5BA2
H2: Auxiliary function outputs to PLC
8.14 Implicitly output auxiliary functions
Comment
; Write an auxiliary function block to a file.
; Process a generated subroutine.
; Delete the file again after execution.
437