Pi Service: Creato; Pi Service: Delece - Siemens SINUMERIK 840D sl Function Manual

Hide thumbs Also See for SINUMERIK 840D sl:

Table of Contents

Description of formal parameters

PI service: CREATO

Function: Create tool

Creation of a tool with specification of a T number. The tool is entered as existing in the tool

directory area (TV). The first "cutting edge" D1 (with zero contents) is created for tool offsets

in the TO block. D1 (with zero contents) is also created for the OEM "cutting edge" data in the

TUE block - if one is present. If a TU block exists, it will contain the data set for the tool.

Description of formal parameters

Function: Delete a tool cutting edge

If the T number of an existing tool is specified in parameter "T number" in the PI service, then

a cutting edge is deleted for this particular tool (in this case, parameter "D number" (number

of cutting edge to be created) has a value range of 00001 - 00009). If a positive T number is

specified as a parameter and the tool for the T number entered does not exist, then the PI

service is aborted. If a value of 00000 is entered as the T number (model of absolute D

numbers), then the D number values can range from 00001 - 31999. If the specified cutting

edge does not exist, then the PI service is aborted in both cases.

Description of formal parameters

Basic Functions

Function Manual, 01/2015, 6FC5397-0BP40-5BA2

1, 2, 3 ... 10

1, 2, 3 ... 10

1, 2, 3 ... 10

P3: Basic PLC program for SINUMERIK 840D sl

Create tool cutting edge

Delete cutting edge

T number of tool for which cutting edge must be cre‐

ated. A setting of 00000 states that the cutting edge

should not refer to any particular tool (absolute D

Edge number of cutting edge that must be deleted

13.17 Block descriptions

Show Quick Links

Table of Contents

Sinumerik 828d Sinumerik 840de sl