Pi Service: Tmcrmt - Siemens SINUMERIK 840D sl Function Manual

P3: Basic PLC program for SINUMERIK 840D sl
13.17 Block descriptions
Signal
WVar7:
WVar8:
13.17.4.32

PI service: TMCRMT

Function: Create multitool
The PI service is used to create a new multitool with a defined identifier, an optionally
specifiable multitool number, the number of tool locations, and the type of distance coding.
Note
Before and after this PI service, the PI service MMCSEM with parameter "WVar1" =1
(TMCRTO) must be called. See Chapter "PI service: MMCSEM (Page 950)".
Description of formal parameters
Signal
PIService:
Unit:
Addr1:
WVar1:
WVar2:
WVar3:
WVar4:
962
Type Value range
INT 1, 2, 3
INT 0, 1, 2, 3
Type Value range
ANY "PI".TMCRMT
INT 1, 2, 3 ... 10
STRING
INT 0
INT -1, 1, 2 ... 32000 Multitool number
INT 2, 3, 4 ... MAX
INT 1, 2, 3
Description
Search direction:
1: Forwards from the first location of the search do‐
main
2: Backwards from the last location of the search
domain
3: Symmetrical to the real magazine location, which
is located upstream of the location specified under
"WVar5" (number of the reference magazine) and
"WVar6" (number of the reference location)
Search type
Search for the property in the search range:
0: all tools, cutting edge-specific
1: first tool, cutting edge-specific
2: all tools, via all cutting edges
3: first tool, via all cutting edges
Description
Create multitool
TOA
Multitool designator (max. 32 characters)
Reserved
-1: Automatic assignment of the multitool number
by NC
1, 2, 3 ... 32000: Multitool number,
note: The multitool number must be unique across
the whole system
Number of tool locations
MAX = Parameterized number in MD17504
$MN_MAX_TOOLS_PER_MULTITOOL
Type of distance coding
Function Manual, 01/2015, 6FC5397-0BP40-5BA2
Basic Functions