Frames Of The Frame Chain; Overview - Siemens SINUMERIK 840D sl Function Manual

K2: Axis Types, Coordinate Systems, Frames
10.5 Frames
Bit
1
1) Jump of the position value
2) No jump of the position value
Programming
Com‐
mand
G53:
G153:
SUPA:
G500:
DRFOF:
10.5.5

Frames of the frame chain

10.5.5.1

Overview

The following frames are available:
● Settable frames (G500, G54 ... G57, G505 ... G599)
● Grinding frames (GFRAME0 ... GFRAME100)
● Basic frames
● Programmable frame
● System frames
728
Val‐ Meaning
ue
0 Position values in system variables with frame suppression
1 Position values in system variables without frame suppression
Meaning
Nonmodal suppression of the following frames:
$P_TRAFRAME : $P_PFRAME : $P_ISO4FRAME : $P_CYCFRAME
$P_IFRAME : $P_GFRAME : $P_TOOLFRAME : $P_WPFRAME :
Non-modal suppression of the frames as for G53 plus following frames:
$P_PARTFRAME : $P_SETFRAME : $P_EXTFRAME : $P_ACTBFRAME
$P_ISO1FRAME : $P_ISO2FRAME : $P_ISO3FRAME :
Implicit preprocessing stop and non-modal suppression of the frames as for G53 and
G135 plus following frames:
● Handwheel offsets (DRF)
● Overlaid movement
● External work offset
Modal activation of the G500 frame. The G500 frame should normally be a zero frame.
Deactivation (deletion) of the handwheel offsets (DRF)
1)
2)
Function Manual, 01/2015, 6FC5397-0BP40-5BA2
Basic Functions