Pi Service: Tmdlmt; Pi Service: Posmt - Siemens SINUMERIK 840D sl Function Manual

13.17.4.33

PI service: TMDLMT

Function: Delete multitool
The PI service is used to delete a multitool in all of the data blocks in which it is saved. Tools
equipped in multitool are then no longer equipped and no longer loaded, but they are still
defined.
Description of formal parameters
Signal
PIService:
Unit:
Addr1:
WVar1:
WVar2:
WVar3:
13.17.4.34

PI service: POSMT

Function: Position multitool
The PI service is used for positioning a multitool at the programmed location or alternatively
at the programmed tool, which is located in one of the locations of the multitool. The tool itself
can either be specified using its T number or with its name plus duplo number. A multitool can
only be positioned if it is at a toolholder location and if no tool offset with regard to this toolholder
location is active.
Position specification
The position specification can be alternatively assigned via:
No
.
1
2
3
Basic Functions
Function Manual, 01/2015, 6FC5397-0BP40-5BA2
Type
ANY
INT
STRING
INT
INT -1, 1, 2 ... 32000 Multitool number
INT
Addr1 WVar1
Empty string Number of the
toolholder
Tool name Number of the
toolholder
Empty string Number of the
toolholder
P3: Basic PLC program for SINUMERIK 840D sl
Value range Description
"PI".TMDLMT Delete multitool
1, 2, 3 ... 10 TOA
Multitool designator (max. 32 characters)
0 Reserved
-1: Delete the multitool with the name specified in
"Addr1"
1, 2, 3 ... 32000: Delete the multitool with the speci‐
fied multitool number;
note: Parameter "Addr1" is not evaluated
0, 1 Tools contained in the multitool:
0: Do not delete
1: Delete
WVar2
Tool number
-1
-1
13.17 Block descriptions
WVar3 WVar4
-1
Duplo number
-1 Multitool location
number
963