Siemens SINUMERIK 840D sl Function Manual page 918

P3: Basic PLC program for SINUMERIK 840D sl
13.17 Block descriptions
Signal
MCP1NotSend :
MCP2NotSend:
MCPSDB210:
MCPCopyDB77:
MCPBusType:
HHU:
BHGIn:
BHGOut:
BHGStatSend:
BHGStatRec:
BHGInLen:
BHGOutLen:
BHGTimeout:
BHGCycl:
BHGRecGDNo:
BHGRecGBZNo:
BHGRecObjNo:
918
Typ Type
e
I BOOL
I BOOL
I BOOL
I BYTE
I INT
I POINTER
I POINTER
I POINTER
I POINTER
I BYTE
I BYTE
I S5time
I S5time
I INT
I INT
I INT
Value range
0 (FALSE), 1 (TRUE)
false
false
3, 4, 5, 6
0, 5
E0.0 ... E124.0
or
M0.0 ... M252.0
or
DBn DBX0.0 ... DBXm.0
A0.0 ... A124.0
or
M0.0 ... M252.0
or
DBn DBX0.0 ... DBXm.0
A0.0 ... A124.0
or
M0.0 ... M252.0
or
DBn DBX0.0 ... DBXm.0
A0.0 ... A124.0
or
M0.0 ... M252.0
or
DBn DBX0.0 ... DBXm.0
HHU default:
B#16#6 (6 Byte)
HHU default:
B#16#14 (20 Byte)
Recommendation: 700 ms
Recommendation: 100 ms
HHU default: 2
HHU default: 2
HHU default: 1
Description
0: Send and receive operation activated
1: Receive machine control panel signals
only
Available owing to compatibility
Available owing to compatibility
b#16#yx:
● Bus type MCP1: lower nibble (x)
● Bus type MCP2: upper nibble (y)
3: PROFIBUS
4: PROFIBUS on the MPI/DP port
5: Ethernet
6: PROFINET
Mixed mode is possible (see Chapter "Con‐
figuration machine control panel, handheld
unit, direct keys (Page 867)")
Handheld unit interface
0: No HHU
5: HHU on Ethernet
Start address PLC receive data from HHU
Start address PLC transmit data to HHU
Available owing to compatibility
Available owing to compatibility
Available owing to compatibility
Available owing to compatibility
Available owing to compatibility
Available owing to compatibility
Ethernet DIP switch
Available owing to compatibility
Available owing to compatibility
Function Manual, 01/2015, 6FC5397-0BP40-5BA2
Basic Functions