Data Lists; Machine Data; Displaying Machine Data; Nc-Specific Machine Data - Siemens SINUMERIK 840D sl Function Manual

K2: Axis Types, Coordinate Systems, Frames

10.9 Data lists

10.9 Data lists
10.9.1

Machine data

10.9.1.1

Displaying machine data

Number
SINUMERIK Operate
9242
9243
9244
9245
9247
9248
9424
9440
9449
9450
9451
10.9.1.2

NC-specific machine data

Number Identifier: $MN_
10000 AXCONF_MACHAX_NAME_TAB
10600 FRAME_ANGLE_INPUT_MODE
10602 FRAME_GEOAX_CHANGE_MODE
10610 MIRROR_REF_AX
10612 MIRROR_TOGGLE
798
; $P_IFRAME = ctrans(x,1,y,2,z,3,a,4,b,5,c,6):crot(z,
; $P_PFRAME = ctrans(x,1,y,2,z,3,a,4,b,5,c,6):crot(x,
Identifier: $MM_
MA_STAT_DISPLAY_BASE
MA_TU_DISPLAY_BASE
MA_ORIAXES_EULER_ANGLE_NAME
MA_PRESET_FRAMEIDX
USER_CLASS_BASE_ZERO_OFF_PA
USER_CLASS_BASE_ZERO_OFF_MA
MA_COORDINATE_SYSTEM
ACTIVE_SEL_USER_DATA
WRITE_TOA_LIMIT_MASK
MM_WRITE_TOA_FINE_LIMIT
MM_WRITE_ZOA_FINE_LIMIT
45)
10,y,20,z,30)
Description
Numerical basis for display of moving
joint STAT
Numerical basis for display of rotary
axis position TU
Display of orientation axes as Euler an‐
gle
Value storage scratching and PRESET
Availability of basic offset in "Parame‐
ters" operating area
Availability of basic offset in Machine
operating area
Coordinate system for actualvalue dis‐
play
Active data (frames) are immediately
operative after editing
Applicability of MD9203 to edge data
and locationdependent offsets
Limit value for wear fine
Limit value for offset fine
Description
Machine axis name
Sequence of rotation in the frame
Frames and switchover of geometry axes
Reference axis for mirroring
Change over mirror
Function Manual, 01/2015, 6FC5397-0BP40-5BA2
Basic Functions